electronic t5 ballast 54w

electronic t5 ballast 54w 1.CE,CB,SAA,Nemko,ROHS approved 2.OEM,high quality 3.PF:0.98,THD:15% 4.Voltage:120V or 230V

 electronic t5 ballast 54w1.Apply plug- in wiring terminal, convenient installation. 2.Long life low current wave peak 3.High Power factor 4.Low Total Harmonic Distortion,low lamp current crest factor5.EMC effection:Pass, 6.Comply to EN 61347-1,EN 61347-2-3,EN 55015,EN 61547,EN 61000-3-2, 7.Start mode :Preheat start or instant start selectable 8.Average usable life:>20000hrs, 9.AC voltage range(min-max)170-264VDC voltage range(min-max)198-276V10.Energy Efficiency:EEI=A211.Suitable for automatic and manual wiring.12.suitable for emergency lighting.13.Safe switch off of defective lamps14.Automatic re-start after lamp change.15.Protection against lamp fault condition.(contain End of lamp life protection.)16.End of lamp life,over-heat,over-load protection17.Ingress protection:IP20

Features of electronic ballast:

1. Favorable low voltae starting performance,start the lamp under 130v low voltage,power supply.

2. Apply plug-in wiring terminals,conbenient installation apply electronic soft start technology; outstanding performance,long life low current wave peak ratio,

3. The electromagetic compatibility reaches the national standard,high power factor >0.98

Model	light source fitted	Rated voltage	PF	line power	THD	LCCF (crest Factor	Lamp connection	Ta(°C)
E214	T5 2×14W	110/220-240V50/60Hz	0.98	28W	15%	≤1.7	abreast	-25~+50
E221	T5 2×21W	110/220-240V50/60Hz	0.98	42W	15%	≤1.7	abreast	-25~+50
E224	T5 2×24W	110/220-240V50/60Hz	0.98	48W	15%	≤1.7	abreast	-25~+50
E228	T5 2×28W	110/220-240V50/60Hz	0.98	56W	15%	≤1.7	abreast	-25~+50
E239	T5 2×39W	110/220-240V50/60Hz	0.98	78W	15%	≤1.7	abreast	-25~+50
E249	T5 2×49W	110/220-240V50/60Hz	0.98	98W	15%	≤1.7	abreast	-25~+50
E254	T5 2×54W	110/220-240V50/60Hz	0.98	108W	15%	≤1.7	abreast	-25~+50

electronic t5 ballast 54w